blade 7000 box repairer?

Anyone know of a blade 7000 box repairer?

depending on problem even car phone repairs or tv repairs might also help.

When I turn on the box all I get is a blinking red light and 4 unusual digits on the display.

post in the blade section maybe box needs reflashing or scanned? dont know that box but could be something simple?

Reboot the box, if no good,
To reset the box to its factory default state do the following: With the box turned off hold the MENU button down on the front panel. Power the box up while still holding the menu button down. You will now see the Engineer Boot Menu. Select Option 3 to perform a factory reset on the box. PLEASE NOTE: This will erase all user settings on the box and return it to its factory state.
Take a note of line/sub provider info.

jonpc wrote:Reboot the box, if no good,
To reset the box to its factory default state do the following: With the box turned off hold the MENU button down on the front panel. Power the box up while still holding the menu button down. You will now see the Engineer Boot Menu. Select Option 3 to perform a factory reset on the box. PLEASE NOTE: This will erase all user settings on the box and return it to its factory state.
Take a note of line/sub provider info.

 Tried this ^ but as soon as i turn the box on all i get is the (flashing red light) and this (t t : t t) on the display.

Although it does sound like a hardware fault perhaps trying another firmware may do the trick.

STBTool - Firmware Uploade

Firmware Uploader for BM7000 to upgrade your s/w on the set top box via COM/RS232 Port