help needed for blade 7000 newby
2 posters
Page 1 of 1
help needed for blade 7000 newby
anyone please help me with how to get csline onto box im well stuck, got a 24 hour freeby but dont know how to use it
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
what they sent you is address,port,id,password in that order.if is a newcamd(n: address) des-key will be the long number 0102030405060708091011121314. if it says no at the end ignor that.in the address ONLY put the address WITHOUT the n: or c: in it. ie c:me.my.biz would be me.my.biz only.protocol should be cccam for a c: address or newcamd for a n: address.leave the rest of the setting as is and hit red button,the disconnected should turn green and say connected
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Re: help needed for blade 7000 newby
thanks for your help but still no luck, email they sent me , reads, C:----------9000 --------- i put them on the sever editor, but do i need to fill in the id, password and address i tryed this and nothing changed but what should the port be on its on 0 thanks up front
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
sent you pm message should read c:........... 9000 .......... ............. c:........= address 9000=port ..........= id ........=password. look at it closely c:............./9000/............/............ address/port/id/password .there should be 2 sets of numbers/letters after 9000 these are your id and password and must be entered in the id and password section of the blade edit!
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Re: help needed for blade 7000 newby
port changes straight to 90000 when i try to put in 9000
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
check your details they sent you then count your 00s will not let you put in 9000 must be 90000. so address= c:.............(without puttin in the c: only the address)/ protocol=cccam/ id=??????/ password=?????/port=90000steveinuk wrote:port changes straight to 90000 when i try to put in 9000
Last edited by sb18180 on Sun Feb 20 2011, 11:31; edited 1 time in total
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Re: help needed for blade 7000 newby
soon as i press ok or exit port changes number but stil not connecting
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
press red button to connect
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Re: help needed for blade 7000 newby
do you have the blade connected to your router?sb18180 wrote:press red button to connect
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Re: help needed for blade 7000 newby
still no luck everything looks as you say apart from the port it will stay on any number apart from 90000 no matter if i exit or ok, red button nothing changes (connected to router) dhcp on ip settings all there
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
changed to green had to put 0 at the front of 9000 many thanks
steveinuk- Newbie
- Number of posts : 17
Registration date : 2011-02-17
Re: help needed for blade 7000 newby
simples glad you sorted it weird port number but hey if it works.
sb18180- Adviser
- Number of posts : 84
Registration date : 2011-01-27
Similar topics
» help needed for blade 7000 newby
» blade 7000
» help with blade needed
» Blade set up help needed
» Help Needed For a Blade Newbie!
» blade 7000
» help with blade needed
» Blade set up help needed
» Help Needed For a Blade Newbie!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|