Blade set up help needed
3 posters
Page 1 of 1
Blade set up help needed
Hi all, having a nightmare with a blade 7000.... trying to set it up put new firmware on, got to the channel stage then box crashed with LNBF on the display on the box:affraid: ....
now when i switch the box on it just says weak or no signal and the LNBF message comes back on the box, it crashes and wont even let me into the menu!!!! can antone help me...PLEASE......
now when i switch the box on it just says weak or no signal and the LNBF message comes back on the box, it crashes and wont even let me into the menu!!!! can antone help me...PLEASE......
baso1- Number of posts : 2
Registration date : 2011-11-11
Re: Blade set up help needed
take your f-connectors off the cable sounds like you have a strand of outer cable touching the inner core, recut and start again . if still stuck pm me your number and ill talk you through it
nobby11- Expert
- Number of posts : 204
Registration date : 2011-01-30
Re: Blade set up help needed
Cheers nobby much appriciated, gonna give it a go in the morning if i have no joy i will pm you my number
baso1- Number of posts : 2
Registration date : 2011-11-11
Re: Blade set up help needed
Switch the box off,hold the menu button then switch back on.
Check the LNB outside on the dish,read the last part of Dooby's tut.
Blade 7000 HD 3D All info
Check the LNB outside on the dish,read the last part of Dooby's tut.
Blade 7000 HD 3D All info
jonpc- .
- Number of posts : 2835
Registration date : 2008-08-11
Similar topics
» help with blade needed
» Help Needed For a Blade Newbie!
» help needed for blade 7000 newby
» help needed for blade 7000 newby
» Hello! help needed!
» Help Needed For a Blade Newbie!
» help needed for blade 7000 newby
» help needed for blade 7000 newby
» Hello! help needed!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|