780 and 850 boxes working again

users have posted latest image released for both boxes are now working with a cable nline server.

Thanks for the regular information updates MOREHELPME.

The 780 fix has bugs don't use.

you beat me to it ,780 firmware was removed from service and hopefully new better one coming.

wow ,that's some great news,how will you put the nline in on the 780

by using pc and remote control.
people will have to source nlines that use newcamd
mgcamd or cccam wont work.

in other words you are using your own cable provider to buy your line.

Typical,my new box runs mgcamd lines,sure i'll work something out 

The box you have may also run on newcamd, likely line can be changed to newcamd ask your supplier.
Change - Protocol = Newcamd

firmware for all 3 kvs has been out i see now
a750 and the a780 and the a850.

do you have a link for the a780 firmware

Go for it, for all three boxes.
https://app.box.com/s/2od36dkyc4zwp1q14dk7i5uugvk7j00u

got it ,thank you,so who's gonna post up how it's done 

As regards to the firmware unzip file, https://dooby2oons.forumotion.com/t2123-set-up-kryptview-a780
If "Download not requested" shows a force flash may be needed (start the download seconds before switching on the box).
Install Newcamd info, Menu - Installation - Newcamb setup - password 0000 -
 (taken from Dooby's Blade setup.
ip: test.ip.com <<<<<<< put here your server address
user: username <<<<<<< put here your username/ID for server
password: password <<<<< put here your password for server
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 <<<<<< only used for newcamd525 (don't touch)
port: <<<<<<< write here your port for server.
Once line info is installed press
Active to ON
Connection = Connected if line info is correct, exit, job done, good luck.lol

do you have to do the above or will it update from the box

gibbo244 wrote:do you have to do the above or will it update from the box

Sorry should have said update manually with cable only for (A780) (USB for 850)

how he did it.

N: web.address zzzzz xxxxxx yyyyy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
You get this from provider

Convert web address provided to ip and enter this on first option
zzzzz is your port
xxxxx is your user id
yyyyyy is your password
0102.... Without spaces
Active = yes
wait for couple of minutes
not connected should change to connected

850- 1.02.05 https://app.box.com/s/2od36dkyc4zwp1q14dk7i5uugvk7j00u
An internet update for those on 1.02.04.
Newcamd will now support extended newcamd servers ie.mgcamd


 A780 Info tomorrow night after feedback on above.

I flashed the box with the new firmware and did an online update . I set up the newcamd with an nline and status is showing as connected to server but the channels are still showing scrambled. Anybody has a clue???

Possibly a bad flash, which box.?

Being said there will some a780 news soon..

mcm wrote:Possibly a bad flash, which box.?

Being said there will some a780 news soon..

box is A780. i flashed it with the the latest firmware and reflashed via the box again as there is an update available.
still not working with nlines.although saying connected to server. nline is reliable as it works on my satellite box.

would a sat nline work in a kv?i know a sat nline will not work on an amiko combo when accessing the cable option side

780 has a new online update to now use mgcamd.
a sat line is for sat boxes only
you need a cable nline for cable boxes

Do you mean update via box or a new download to reflash the 780

There is new software that can be downloaded via box/internet if V4.5.0 has been installed manually in the last few days, this is in relating to the a780

my 780 wont download from its menu system info says
pv4.2    
v3.00
could you please tell me which file from downloads i need please

Download and install manually V4.5.0, then update via box to V4.5.03

Minor update (bug) for A780, can be manually downloaded and via net.
https://app.box.com/s/2od36dkyc4zwp1q14dk7i5uugvk7j00u

hit a glitch when i connect null modem cable to box then computer i lose my moniter am i doing something wrong
only one port on back of computer for cable

The correct cable/setup is shown in this guide apart from different software.
https://dooby2oons.forumotion.com/t2454-channels-and-pts-update-15-04-16

Depending on your PC cable should look similar to this on Ebay, PM the seller to check.
http://www.ebay.co.uk/itm/251444435200?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

looks like im useing wrong cable thanks