Kryptview A780
3 posters
:: Kryptview
Page 1 of 1
Kryptview A780
Hi All,Just recently purchase A780 which a friend flashed for me but apart from the freeview channels the rest are showing scrambled or no video I have it connected to the modem the mains and vermin do I also require a router if so any particular type,any advice would be greatly appreciated.
ewn1942- Number of posts : 2
Registration date : 2011-10-10
Re: Kryptview A780
Have you tried resetting the modem?
CHimaera1985- Adviser
-
Number of posts : 87
Location : London
Registration date : 2011-05-10
Re: Kryptview A780
Using direct from the modem is OK,not using a router means PC and TV can't be used at the same time.
Suggest your using the wrong Net ID on the box
If you have a VM sub box press Settings/Tech Stuff/ that shows the correct ID for your area.maybe NetId - 40982
Then factory reset using the correct Net ID scanning from a direct feed no splitter.
If above don't work state which firmware is on the box
Menu/System Info should read Date__24/04/11
Suggest your using the wrong Net ID on the box
If you have a VM sub box press Settings/Tech Stuff/ that shows the correct ID for your area.maybe NetId - 40982
Then factory reset using the correct Net ID scanning from a direct feed no splitter.
If above don't work state which firmware is on the box
Menu/System Info should read Date__24/04/11
jonpc- .
- Number of posts : 2835
Registration date : 2008-08-11
Re: Kryptview A780
Thanks to JONPC I think that will solve the problem.
ewn1942- Number of posts : 2
Registration date : 2011-10-10
:: Kryptview
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|