multisat channel list ?

Anyone know where to get a multisat channel list for the BM7000s ?.

yes m8 pm me email m8 and ill send it over, chers

nobby11 wrote:yes m8 pm me email m8 and ill send it over, chers

Feel free "Nobby" to post the list/link on open forum,as there's no rules against it.

Thanks for your PMs nobby11, but I have now found a multisat channel list for the BM7000s an hour or so ago on sataid, below is a copy of the Channel list Instructions, I removed the links, just in case you don't allow them.





L53 [Blade 7000] v2.20 multi-sat Channel list.
Released: Saturday 10 September 2011



The L53 [Blade 7000] channel list can be used with any receiver,
that accepts the following formats, .ndf .cndf, and supports a minimum of 10,000 channels.



Please Note:
If you receive the message [Insufficient Storage] when trying to install the channel list.
All you have to do is:
Goto Menu -> Installation -> Database Reset -> and Delete All Channels once all the channels have been deleted, re-boot the receiver, then simply follow the install instructions below.



How to install:
It's always advisable to delete ALL Channels before installing a New Channel List.
1 .. Download and unzip the L53 Channel list.
2 .. Place the unzipped ndf file onto a USB Stick [Formatted in FAT32].
3 .. Insert the USB Stick into the USB port on the rear of the receiver.
4 .. Now goto Menu -> Utilities -> Download and select the L53 channel list
now click the OK button and select [Normal DB] and click OK, the channel list
will now auto install, please do not interupt the installation.



Default Settings:
Default Satellite: Thor 1 West
Default start up channel: The Poker Channel
Default LNB: Universal 9.750 - 10.600
Default Motor Protocall: Diseqc 1.2
Satellite Coverage: 45 East - 30 West
Number of Satellites: 30
Favourites: Empty
Radio Channels: 0



Please Note:
Astra 1C is in an inclined orbit, so unless you have a motorised elevation setup on your dish,
you may not receive any signal.