kv a750

hi guys
i have a kv a750 and lost all channel when kv server went down,i know the kv 780's are slowly coming back on,BUT i cant seem to get my kv 750 working i tried reflasing and rescanned but still comes up scrammbled,any ideas please thanks in advance

i guess your useing the eye-connect, so all will be the same if and when it all settles down (hopefully).

use a different way of recieving channels like that pm if needed

The KV box has been on and off today,rescan from a direct feed (no splitter)
Use the latest update for the box as some earlier releases are not working.

thanks for the replys guys,i have a direct feed to the box,and rescanned last night and this morning my kv 780 worked but kv750 did not,yes it is with a i-connector

Check which firmware is on the box,as stated old firmware will not work.

do i need to update my A780 since they came back on

no not at all

[
quote="gibbo244"]do i need to update my A780 since they came back on[/quote]
if you are getting programs no need

thanks

the firmware on my kva750 which dos not work is pv 3.0.05 is there a newer firmware than this please guys

thedon11 wrote:the firmware on my kva750 which dos not work is pv 3.0.05 is there a newer firmware than this please guys

latest file http://www.4shared.com/file/rKXKzbxp/Kryptview_A750_03012011.html

hi guys just wanted to no if your box works day time.cuz mine only comes at night for the past couple of dayz.am from the west midlands pleazz guyz if you can tell me.

All boxes are going on and off at differemt times due to KV working on the channels.

kv 750 stuck at 95% and not gonig any further any one has any ideas
as to why this is happening

thedon11 wrote:hi guys
i have a kv a750 and lost all channel when kv server went down,i know the kv 780's are slowly coming back on,BUT i cant seem to get my kv 750 working i tried reflasing and rescanned but still comes up scrammbled,any ideas please thanks in advance

u must factory default 1st then go 2 installation menu u will c s/w update do this it may take a while then when its finished just do a full auto scan at end exit go to pay chan like 511 and wait till it pops on ,sorted done a few for m8s this week all back working

Has Jan.firmware been installed.?

remember there are 2 different files,match file to box

the firmware i am using is correct as i have done 1 out off three boxes,
the two boxes i am haveing trouble with goes to 95% download and does not complete to go to the unzip stage,this is the order i have been trying....i do a factory reset,then load the latest firmware,do a s/w update and finally re-scan. i cant understand why both boxes get to 95% and then does nothing i have even left them for about 20 mins after it get to 95%,,sill does not complete,what am i doing wrong,please help doing my head in

Have you tried loading the 750 file manually,
http://www.box.net/shared/6x46dqnksg/1/42848677/730654894

no i haven't i'll give it a go tonite,and i'll post results later,thanks