How to use Smargo cardreader with CCcam on linux receivers a

How to use Smargo cardreader with CCcam on linux receivers and PCs?
DM7020 CCcam.cfg
SERIAL READER : /dev/usb/tts/0 smartreader+
SERIAL READER : /dev/usb/tts/1 smartreader+
SERIAL READER : /dev/usb/tts/2 smartreader+
SERIAL READER : /dev/usb/tts/3 smartreader+

DM800 CCcam.cfg
on USB0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
on USB1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1

PC server CCcam.cfg
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+


Now we need add to CCcam.cfg new line:
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
or whatever USB port your smartreader is entered.

Save CCcam.cfg and run ./CCcam.x86 -d you should see new card is added and running.
In CCcam.cfg is card overklocking and there you just edit like so:
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000 and card works with 4.80mhz set by smartreader+.
Available frequencies

3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 and 16.0 MHz

The user can selecte any freqency. The Smartreader+ will selected the nearest available.
Default smartreader+ speed is with new v1.3 firmware 3.69MHZ and most cards works with that speed.